Yamamoto Baritone #178

Yamamoto baritone 178 back.jpg
Yamamoto baritone 178 end.jpg
Yamamoto baritone 178 headstock back.jpg
Yamamoto baritone 178 rosette.jpg
Yamamoto baritone 178 shoulder.jpg
Yamamoto baritone 178 back.jpg
Yamamoto baritone 178 end.jpg
Yamamoto baritone 178 headstock back.jpg
Yamamoto baritone 178 rosette.jpg
Yamamoto baritone 178 shoulder.jpg

Yamamoto Baritone #178

5,800.00
  • top:     Artist grade Adirondack Spruce
  • back & sides:  East Indian Rosewood
  • lower bout:   17"
  • depth: 3-1/2" at neck block,  4-1/2" at end block
  • "Wedge" body (depth at lower bout):     5" treble side,  3-3/4" bass side
  • sound port: no
  • bevel:    figured koa
  • body binding:   figured koa with BWB purfling
  • Back Strip:    figured koa with Maple strip
  • fingerboard:  Macassar ebony
  • binding:  African ebony with Maple strip
  • inlay:  none
  • fret wire:   Stewmac #149,   18% nickel/silver
  • nut:  traditional, 1/4" thick bone
  • 1-13/16" nut width
  • 2-3/8" string spacing at bridge
  • 2-5/16" fingerboard width at 12th fret
  • neck: 
    • American Mahogany  
    • one-piece
    • shifted spine
    • mortise & tenon bolt-on
      (Cumpiano's hardware-based neck joint, Hex Key:(5/32,9/64))
    • double graphite rod reinforcement
    • two-way truss rod (hex key: 9/64")
    • neck to body joint at 14fret (bass side)
    • side position dot:  white plastic @ 3, 5, 7, 9, 12x2, 15
  • headstock
    • overlay: East Indian rosewood(top), Macassar ebony (back)
    • binding:    African ebony with maple strip
    • decal:    "Y" (MOP)
  • tuners:    SGL510-BL5-C 18:1 ratio
  • rosette ring:    koa & paua avalon
  • bridge
    • African ebony
    • ebony bridge pin
    • saddle:  1/8" thick bone
  • end wedge, heel cap:    figured koa with maple strip
  • finish: nitrocellulose gloss lacquer
  • strings: D'Addario EXP23
  • hardshell case: Hiscox PRO-II-GJ

 

Add To Cart