Yamamoto Baritone 2014

Yamamoto baritone wedge 972921.jpg
Yamamoto baritone back 974225.jpg
Yamamoto baritone shoulder 970612 .jpg
Yamamoto baritone wedge 972921.jpg
Yamamoto baritone back 974225.jpg
Yamamoto baritone shoulder 970612 .jpg
sold out

Yamamoto Baritone 2014

5,800.00

paulownia / EIR

A real one-stop-shopping guitar. Unlike most other baritones, this one can be capoed to the 11th fret before there's any loss of tone. 

  • top:     Paulownia
  • back & side:     East Indian Rosewood
  • "Wedge" shape Jumbo body
    • lower bout:        17"
    • depth: 
      • 3"-13/16 at neck block,  4-5/8" at end block
      • "Wedge" body (depth at lower bout):     5-1/4" treble side,  3-5/8" bass side
  • sound port: no
  • bevel:    Figured Koa
  • body binding:   Figured Koa with BWB purfling
  • Back Strip:    Figured Koa with Maple strip
  • fingerboard:   
    • wood:     Macassar Ebony
    • binding:     African Ebony with Maple strip
    • inlay:    none
    • fret wire:   Stewmac #147,   18% nickel/silver
    • traditional nut
    • nut:    1/4"thick ,bone
    • 1 13/16" nut width
    • 2-3/8" string spacing at bridge
    • 2-3/8" fingerboard width at 12th fret
  • neck
    • American Mahoganyone-piece neck
    • shifted spine
    • Mortise & Tenon bolt-on
    • ( Cumpiano's hardware-based neck joint, Hex Key:(5/32,9/64))
    • Double Graphite Rod reinforcement
    • Two-Way Truss Rod (Hex Key:9/64)
    • neck to body joint at 14fret (bass side)
    • side position dot:  white plastic 3, 5, 7, 9, 12x2, 15
  • headstock
    • overlay:    Macassar Ebony(top), Cocobolo(back)
    • binding:    African Ebony with Maple strip
    • decal:    y(MOP)
    • tuner:    Gotoh 510 18:1 ratio
  • rosette ring:    Koa & Paua Avalon
  • bridge
    • African Ebony
    • Ebony bridge pin
  • saddle:  1/8" thick bone
  • end wedge, heel cap:    Figured Koa with Maple strip
  • finish: Nitrocellulose gloss Lacquer
  • string: D'Addario EXP23
  • Hard Shell Case
Add To Cart